霧化噴嘴

使用微信掃描二維碼分享朋友圈，成交更快更簡單！

空氣霧化噴嘴壓力傳送式噴霧裝置（外混式）

霧化噴嘴有點和特性：

通過外部混合裝置，無需改變液體流量，只需改變空氣壓力，即可對霧化進行控制。

對于扇形噴霧，尺寸A，B,和C是距離噴嘴相應距離處的噴霧角度；

Through the external mixing device, without changing the liquid flow, only need to change the air pressure, can to control the atomization.

For the fan-shaped spray, size A, B, and C corresponding distance is the distance the nozzle spray Angle;

The spray from the nozzle to the maximum dispersion point projection a total distance of D;

When using pressure conveying liquid system, liquid by pressure was taken to the nozzle;

Liquid and compressed air or other gas is mixed in the outside, to produce fully atomized spray;

空氣霧化噴嘴虹吸和重力傳送噴霧裝置（圓形噴霧和扇形噴霧）

優(yōu)點和特性

對于圓形和扇形噴霧，在整個距離B中都保持角度A，超出距離B，噴霧變成湍流，并一直噴射到D距離；

當使用虹吸或重力輸送液體時，液體通過虹吸或重力作用被送往噴嘴；

這些裝置的設計讓液體被吸入輸送管路進入氣流，并在其中被霧化。

Send the spray air atomizing nozzle siphon and gravity, circular spray and fan-shaped spray)

Characteristics and advantages

For circular and fan-shaped spray, remained in the whole distance B Angle A, B, beyond distance spray into turbulence, and injection to D distance;

When using siphon or gravity conveying liquid, the liquid through a siphon or gravity was taken to the nozzle;

These devices designed for liquid pipelines are inhaled into the air, and by atomization in it.

霧化加濕噴嘴之大多頭單流體液壓噴嘴：

該單流體霧化噴嘴組合件由一個噴嘴主體和七個可拆卸的噴霧帽蓋組成。每個帽蓋都有一個內(nèi)芯，方便拆卸清洗。

單流體多頭霧化噴嘴以淋浴似的實心錐形噴流方式噴出非常細小的液滴；

廣泛的流量范圍能夠滿足客戶需求和選擇；

This nozzle was made up by main body and seven spray caps,caps can be disassembled.

Each cap has a inner core,easy to be disassembled and cleaning.

Spray soild cone spray shape and the liquid drops are very small.

Widely flow rate scope to be choosed.

霧化噴嘴一般應用于:

圖書館、文檔中心；

輪機室、機艙等電器消防；

其他需要細水霧滅火的場合。